山東機箱機柜在冬天一樣可以運作，因?yàn)樗休d的是電子產品，電子產品在運轉的過程中就會產生大量的熱量，如果我們不及時散熱的話，就會出現一系列的問題。下面就跟著小編一起去看一看這款山東機箱機柜吧！

　　Shandong chassis and cabinets can also operate in winter because they carry electronic products. Electronic products generate a large amount of heat during operation. If we do not dissipate heat in a timely manner, a series of problems will occur. Let's follow the editor to take a look at this Shandong chassis cabinet!

　　山東機箱機柜在散熱系統中風扇特別適用于經濟的排出高熱負載。只有在柜內溫度高于環境溫度時，使用風扇才是有效的。因?yàn)殡娏C(jī)柜中熱空氣比冷空氣輕，柜內空氣流向應當是由下往上，因此，通常情況下，應在柜體的前門或者側壁板的下方作為進氣口，上方作為排氣口。如果工作現場的環境比較理想，沒有粉塵、油霧、水汽等影響電氣控制柜內的各元器件正常工作的，可采用進氣口裝風扇，排氣口有可能的話加裝一裝飾板，進氣口為了美觀，可以在外面加裝一風機裝飾板。

　　The fan in the Shandong chassis cabinet is particularly suitable for economically discharging high heat loads in the cooling system. The use of a fan is only effective when the temperature inside the cabinet is higher than the ambient temperature. Because hot air in the power cabinet is lighter than cold air, the air flow inside the cabinet should be from bottom to top. Therefore, in general, the front door or side wall panel of the cabinet should be used as the air inlet, and the top should be used as the exhaust outlet. If the working environment at the workplace is ideal and there is no dust, oil mist, water vapor, etc. that affect the normal operation of various components in the electrical control cabinet, a fan can be installed at the air inlet. If possible, a decorative panel can be added to the exhaust outlet. For the sake of aesthetics, a fan decorative panel can be installed outside the air inlet.

　　如果工作現場的環境不理想，含有粉塵、油霧、水汽等影響電氣控制柜內的各元器件正常工作的，那就應該在進氣口選用過濾風扇，在排氣口選用過濾柵，以防止粉塵、油霧、水汽等進入電氣控制柜內。

　　If the working environment at the workplace is not ideal and contains dust, oil mist, water vapor, etc. that affect the normal operation of various components in the electrical control cabinet, a filter fan should be selected at the inlet and a filter grille should be selected at the exhaust to prevent dust, oil mist, water vapor, etc. from entering the electrical control cabinet.

　　本文由 山東機箱機柜 友情奉獻.更多有關的知識請點擊   http://jietitong.cn    真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Shandong chassis and cabinets. For more related knowledge, please click http://jietitong.cn Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned