一卡通系列
基本特點：
1.通過IC卡在管理系統與預付費智能表之間的信息傳遞，實現預付費管理。
2.系統安裝方便，界面友好，操作簡便，便于學習使用。隨系統安裝同時，配備詳盡的系統使用手冊，便于用戶學習使用。
3.用戶IC卡高密度加密，并且與表具之間執行嚴格的加密確認，嚴防自行拷貝用戶卡。
4.可分用戶、時間、地區查閱、匯總和打印營業數據，便于查看長時間未充值用戶。
5.操作員實行權限管理，不同權限賦予不同操作功能。便于系統操作管理，嚴格控制非法操作的發生。
6.刪除修改記錄實行“密鑰”方式，將權力集中，防止數據信息遺失。
7.數據庫定期備份，防止發生意外時數據庫遭到破壞，導致數據丟失。
基本操作流程：開戶 初始化卡 預購 讀卡
基本特性：
四表一卡管理系統：一塊單相電表，一塊熱量表，一塊燃氣表，一塊冷水表四種表的一卡通管理系統。用戶持一張用戶卡就可以購買電量、熱量、燃氣和冷水，并分別為這四種預付費表充值，方便實用。
六表一卡管理系統：一塊單相電表，一塊熱量表，一塊燃氣表，一塊冷水表，一塊熱水表，一塊中水表六種表的一卡通管理系統。
八表一卡管理系統：兩塊單相電表，一塊熱量表，一塊燃氣表，一塊冷水表，一塊熱水表，一塊中水表，一塊純凈水表八種表的一卡通管理系統。
水資源智能管理系統（大口徑水表管理系統）專供大口徑水表用戶使用 一個用戶安裝一套系統需要配備系統卡（一張）和管理卡（一張或多張）：系統卡對用戶系統進行注冊，只在系統安裝后使用一次；管理卡加強用戶系統權限管理，用戶在補購和刪除預購記錄時需要該卡。系統卡和管理卡采用邏輯加密卡，實行嚴格加密，保證卡中數據安全可靠。
售點管理系統：可以兼容單、三相兩種電表的管理。一個用戶安裝一套系統需要配備系統卡(一張)和管理卡(一張或多張)：系統卡對用戶系統進行注冊，只在系統安裝后使用一次，根據用戶系統卡中信息，系統自動決定用戶的系統只做單相表管理，還是只做三相表管理，或者同時管理單、三相兩種表；管理卡加強用戶系統權限管理，用戶在補購和刪除預購記錄時需要該卡。系統卡和管理卡采用邏輯加密卡，實行嚴格加密，保證卡中數據安全可靠。
熱量表管理系統：熱量表管理系統V1.0，專供預付費熱量表用戶使用。采用基本費、熱量費兩種單價收費的方式收費。采暖部門每年按居住面積向用戶收取一次基本費用，再按用戶購熱量收取熱計量費用。
管理系統做到界面美觀，操作簡便，安全可靠。
GENERAL CHARACTERISTICS
BASIC CHARACTERISTICS
Data is transferred by IC card between the management system and meter(s) to realize prepayment function;
Easy installation, friendly user interface, user manual bound in system software;
High density encryption of user card, strict encryption confirmation between meter and user card. It prevents duplication of user card by users;
Transaction record can be tracked and printed in terms of user name, time and area, for check-up of “zero transaction” users in long time period.
System operators are authorized by different levels of access, given different jurisdictions (to prevent fraud).
Transaction record can only be revised or deleted with cryptograghic key (password).
Database is supported periodically for safety in unexpected accidents.
BASIC PROCEDURE FOR NEW SUBSCRIBERS
Open an account at vending point.
Initialize user card.
Pre-purchase.
Write transaction data into user card.
TECHNICAL PARAMETERS
Communication ports: built-in RS232 serial interface, attached RS232 serial or standard parallel interface.
Baud frequency of series: 1200-115200BPS
Transmission mode of parallel interface: whole byte and half byte
Operating system: WIN 9X
CPU: Celeron 300 or above
Memory: min. 128M
SPECIAL FEATURES
“One-card for four-meter” system: a single-phase watt-hour meter, a heat meter, a gas meter and a cold water meter.
“One-card for six-meter” system: a single-phase watt-hour meter, a heat meter, a gas meter, a cold water meter, a hot water meter, and a recycled water meter.
“One-card for eight-meter” system: two single-phase watt-hour meters, a heat meter, a gas meter, a cold water meter, a hot water meter, a recycled water meter and a purified water meter.
Electricity-vending management system: managing one or both of single-phase and three-phase watt-hour meters by the same system, determined by customers with a system card. The system card is also used for system registration. One or several managing cards are provided to enhance jurisdiction management of the system and for card recharging anddeletion of pre-purchase record. Logical encryption of system card and managing card ensures data security of the cards.
Water resource management system (heavy-duty water meter): for water user of large size pipe. To operate the system, one system card and one or several managing card(s) are needed. Functions of the two cards are same as that for Electricity Vending Management System.
Multi-tariff water meter management system: it manages water consumption by quota. Extra consumption above basic quota will be charged with higher step tariffs. Steps and step tariffs are set according to policy of management department, from one up to six steps and tariffs.
Heat meter management system: the system version V1.0 is for customers who installed prepayment heat meters. Heat consumption is charged on basis of basic fee plus consumption charge. Once a year heating management depart will collect a basic fee from each user based on area to be heated (m2). Consumption charge is based on heat volume user pre-purchased and heat tariff.
Total annual heat expenditure of user =
(Rate of basic fee * area heated)+ (heat tariff * heat volume pre-purchased)
Operation interfaces of management system:
Technical specifications and parameters are subject to change without notice.